© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
42
11-06-150R8
UniLinc PC Application (continued)
Changing a Segment Name (Washer-Extractor Only)
To change a segment name, (i.e., Prewash, Wash, Rinse and Off are the choices) right-click
a segment name. From the pop-up window, select the new name for the segment.
Moving a Segment (Washer-Extractor Only)
To move a segment up or down in the segment list, first click the segment to be moved.
Click the green up and down arrows to move the segment.
Copying a Segment (Washer-Extractor Only)
To copy a segment, right click the segment to be copied. From the pop-up window, click
Copy. Right-click the segment to be pasted over. From the pop-up window, click Paste
Over.
Enabling or Disabling a Segment’s Steps (Washer-Extractor Only)
To enable or disable any of a segment’s steps, first click the cycle to be edited. Then click
the segment to be edited. To enable or disable any of the segment’s steps, click the check
box next to the step number.
To Next Page
Loading...
