© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT11-06-150R8
61
UniLinc PC Application (continued)
Network Controller Commands
In the tree view, click My Network Controllers and right-click the desired network controller. Select
one of the following from the pop-up menu:
Scan for Machines
Scan for machines within the selected network.
Initialize Nodes...
After setting up the network controller, assign node numbers to the machines within the network.
NOTE: This can be done more efficiently using a USB IR device or a PDA.
Edit Wash Alert Email Settings...
Change the Wash alert email format and distribution settings.
1. In the SMTP settings section, enter the server name into the Server name: textbox.
2. To test the email settings, click the Test SMTP Settings button. Fill out the email form and
send it. Make sure the email is sent and received correctly.
3. To select which wash alert emails will be sent, in the Email templates section, click Add
Email Template.... The Email template window opens.
a. In the Header information section, select the email Type, change the Subject (if desired)
and enter the From and To information.
b. Click OK.
View Network Monitor Logs...
Review a report of information about the network.
Maintenance Commands
This menu includes the following options:
Reset Network Controller
Set Polling Rates...
Program Active Node List...
View Node Error Status...
Clear Node Error Status
To Next Page
Loading...
