Alliance Laundry Systems UniLinc - Page 73

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT11-06-150R8
73
PC to Control Infrared Communication (Continued)
2. The Program machines window opens.
3. From the Cycle Sets section of the Program machines window, select the cycle set you would like
to send to the machine.
4. Washer-Extractor only: Select the cycles to be sent to the machine by clicking in the checkbox
next to the cycle’s name. Cycles with a check are selected and cycles without a check are
deselected.
a. To select all of the cycles within the cycle set, click Check All Cycles. A check mark appears
next to all of the cycles listed in the Cycles section.
b. To deselect all of the cycles within the cycle set, click Uncheck All Cycles. The check boxes
next to the cycles listed in the Cycles section are empty.
5. Click the Send button. The Program machines window opens.
6. Click Send.
7. Align the window on the back of the infrared communication device with the infrared comm port
window on the machine’s control.
8. The selected cycles are sent to the machine.
9. To close the Program machines window, click the Close button.
Washer-Extractor
Tumble Dryer