Alliance Laundry Systems UniLinc - Re-Naming a Segment; Understanding the Segment Abbreviation

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
92
11-06-150R8
UniLinc PDA Application (Continued)
Re-Naming a Segment
To re-name a segment, press and hold a segment until a pop-up window appears. From the pop-up
window, select On. Select a segment name. The choices are Prewash, Wash and Rinse.
Understanding the Segment Abbreviation
From the Segments screen, each segment includes an abbreviation to summarize the segment’s
settings. The following is a chart that explains what each position within the abbreviation means.
Cycle Segment Example: 01. Wash GH, GL, A0, 08, 00SR, 000E, 13.2g
Position Definition Options
1 (GH) Fill Temperature GH (Global Hot)
GW (Global Warm)
GC (Global Code)
35-205 (Manually-entered fill temperature)
2 (GL) Fill Level GH (Global High)
GM (Global Medium)
GL (Global Low)
OV (Overflow)
1-30 (Manually-entered fill level)
3 (A0) Supply 00 (No supply)
A0 (Supply A)
AB (Supply A and Supply B)
4 (08) Agitate 0-15 (Manually-entered time [in minutes])
5 (00SR) Spray Rinse First Digit: 0-9 (Manually-entered time [in minutes])
Second Digit: Water Temperature (H [Hot], W [Warm] or C
[Cold])
6 (000E) Extract First Digit: 0-9 (Manually-entered time [in minutes])
Second and Third Digit: Extraction speed (VH [Very High], H
[High], M [Medium], L [Low] or VL [Very Low])
7 (13.2g) Water Usage First Digit: Amount of Water
Second Digit: Unit of measure: g (gallons) or l (liters)