ASSEMBLY AND SAFETY PRECAUTIONS
Safety Precautions:
Only qualified caregivers familiar with the proper use of the Stand Aid
should attempt to transfer patients.
Patients unable to pull themselves upright and support their own weight
should not be transported with a Stand Aid.
Never attempt to transfer a patient whose weight exceeds the safe load
limit.
Prior to a transfer check the Stand Aid to insure all components are
properly and securely assembled and in working order.
Do not leave a patient unattended during any part of the transport.
MAXIMUM SAFE WORKING LOAD LIMIT IS 180kgs / 400lbs
Assembly Instructions:
PRIOR TO ASSEMBLY, UNLOAD SHIPPING CARTON AND CHECK ALL
PARTS. IMMEDIATELY CONTACT YOUR DEALER IF PARTS MISSING.
Parts List:
1. Base preassembled with footplate and casters
2. Two side support arm units
To Next Page
Loading...