Allied Radio Knight-Kit T-150 User Manual

Ce te gg =
knight-kit
T-150
TRANSMITTER
. The T-150 is a compact, high-power AM-
CW transmitter that's sure to rate a place
in your Ham setup. Providing bandswitch-
ing coverage of the 80 through 6 meter
8 bands, the T-150 operates at a power input
waren sont —— i - of 150 watts. Built-in AM modulation is
, provided by a combination of screen mod-
ulation and controlled carrier. Thus, at low
cost, practically the equivalent talk-power
of plate modulation is obtained.
Designed to provide a minimum of TVI,
¢ all leads going in-and-out of the cose are
bypassed for RF. There is more than ample
goin in the audio circuit to operote from
any high-impedance, dynomic or crystal
microphone. Keying is clean and chirpless
A
QWER:
ed
ATTS.
INPUT:
ON.
&
iy
Fi
-
|
with
no
hazardous
voltages
at
the
key
con-
THROUGH
10;
100
ON6
os
:
Pe
car
1
tacts.

Allied Radio Knight-Kit T-150 Specifications

General

Modes	AM, CW
Modulation Type	AM
Tuning Method	Manual
Input Voltage	117 VAC
Type	Transmitter
Frequency Range	3.5 to 30 MHz
RF Output Power	60 watts (CW), 45 watts (AM)
Power Requirements	117 VAC, 60 Hz
Tube Complement	12AX7