Allied Telesis AlliedWare Plus GS980MX Series - Chapter 7 Building the Trunk with the Default 10 Gbps Stacking Ports

141
Chapter 7
Building the Trunk with the Default
10Gbps Stacking Ports
This chapter contains the following procedures:
 “Introduction” on page 142
 “Installing the Power Cord Retaining Clip” on page 143
 “Powering On the Switches Individually” on page 144
 “Powering On the Switches Simultaneously” on page 148
 “Starting a Local Management Session” on page 150
 “Verifying the Stack” on page 153
 “Adding Ports 25 and 26 on GS980MX/28 or GS980MX/28PSm
Switches to the Stack Trunk” on page 154
 “Adding Ports 49 and 50 on GS980MX/52 or GS980MX/52PSm
Switches to the Stack Trunk” on page 156
 “Monitoring the Initialization Processes” on page 158