AT-8124XL Installation Guide
5
AT-S30 Management Software
The AT-S30 software is the management software for the switch. You use the
software to configure the switch’s various operating parameters, such as the
IP address and the subnet mask. Managing a switch is simplified through the
use of the management interface, which comes standard with the AT-S30
management software. This interface consists of a series of menus and
prompts that make it very easy for you to set and change a switch’s operating
parameters.
You can access the AT-S30 software and the management interface by
connecting a terminal or a computer with a terminal emulator program to the
RS232 port on the back panel of the switch. You can also manage the switch
with a web browser, the Telnet program, or an SNMP management program.
Note
For instructions on how to use the AT-S30 software and the
management interface, refer to the AT-S30 Management Software
User’s Guide, which is available from the Allied Telesyn web site.
To Next Page
Loading...
