Allied Telesis AT-9000/28 - Show Rmon Alarm; Table 104. SHOW RMON ALARM Command

AT-9000 Switch Command Line User’s Guide
Section X: Network Management 1013
SHOW RMON ALARM
Syntax
show rmon alarm
Parameters
None.
Mode
Privileged Exec mode
Description
Use this command to display the RMON alarms on the switch. Here is an
example of the information.
Figure 164. SHOW RMON ALARM Command
The fields are described in Table 104.
Alarm Index = 2
Variable etherStatsBroadcastPkts.2
Interval 80
Alarm Type rising and falling
Rising Threshold = 1000
Event Index = 5
Falling Threshold = 100
Event Index = 5
Owner Agent
Alarm Index = 5
Variable etherStatsBroadcastPkts.4
Interval 5
Alarm Type rising and falling
Rising Threshold = 5000
Event Index = 1
Falling Threshold = 500
Event Index = 1
Owner Agent
Table 104. SHOW RMON ALARM Command
Parameter Description
Alarm Index The ID number of the alarm.