AT-9000 Switch Command Line User’s Guide
Section XI: Management Security 1145
NO SERVICE SSH
Syntax
no service ssh
Parameters
None.
Mode
Global Configuration mode
Description
Use this command to disable the Secure Shell server to prevent remote
management of the switch with a Secure Shell client. The default setting
for the Secure Shell server is disabled.
Note
Your management session of the switch ends if you disable the
server from a remote SSH management session. To resume
managing the switch from a local management session or a remote
Telnet or web browser session, you must wait for the console timer
to expire if the switch is configured to support just one manager
session at a time. The default setting for the console timer is 10
minutes.
Confirmation Command
“SHOW SSH SERVER” on page 1148
Example
awplus> enable
awplus# configure terminal
awplus(config)# no service ssh
To Next Page
Loading...
