Allied Telesis AT-9000/28 - Hostname

AT-9000 Switch Command Line User’s Guide
Section II: Basic Operations 119
HOSTNAME
Syntax
hostname name
Parameters
name Specifies a name of up to 39 alphanumeric characters
for the switch. A name may contain special characters,
except for spaces and quotation marks.
Mode
Global Configuration mode
Description
Use this command to assign the switch a name. The switch displays the
name in the command line prompt, in place of the default prefix “awplus.”
Example
This example assigns the name “Sw_Sales” to the switch:
awplus> enable
awplus# configure terminal
awplus(config)# hostname Sw_Sales
Sw_Sales(config)#