Allied Telesis AT-9000/28 - Displaying the TACACS+ Client

Chapter 82: RADIUS and TACACS+ Clients
1198 Section XI: Management Security
Displaying the
TACACS+ Client
To display the settings of the TACACS+ client, use the SHOW TACACS
command in the Privileged Exec mode.
awplus# show tacacs
Here is an example of the TACACS+ client information.
Figure 187. SHOW TACACS Command
The fields are explained in Table 124 on page 1225.
TACACS+ Global Configuration
Secret Key :
Time : 10 sec
Server Host : 149.123.154.12
Secret : priv12a
Server Host : 149.123.154.26
Secret : navti84