Chapter 83: RADIUS and TACACS+ Client Commands
1210 Section XI: Management Security
NO RADIUS-SERVER HOST
Syntax
no radius-server host
ipaddress
Parameter
ipaddress Specifies an IP address of a RADIUS server to be deleted
from the authentication server list.
Mode
Global Configuration mode
Description
Use this command to delete IP addresses of RADIUS servers from the list
of authentication servers on the switch. You can delete only one IP
address at a time with this command.
Confirmation Command
“SHOW RADIUS” on page 1223
Example
This example removes the IP address 122.34.122.47 from the list of
RADIUS servers:
awplus> enable
awplus# configure terminal
awplus(config)# no radius-server host 122.34.122.47
To Next Page
Loading...
