Chapter 83: RADIUS and TACACS+ Client Commands
1212 Section XI: Management Security
NO SERVER-BASED AUTHENTICATION TACACS
Syntax
no server-based authentication tacacs
Parameters
None.
Mode
Global Configuration mode
Description
Use this command to disable the TACACS+ client and remote
authentication of manager accounts. To manage the switch when remote
authentication is disabled, use the local manager accounts.
The switch retains the configuration settings of the TACACS+ client when
the client is disabled.
Disabling remote authentication does not interrupt your current
management session.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 129
Example
awplus> enable
awplus# configure terminal
awplus(config)# no server-based authentication tacacs
To Next Page
Loading...
