Allied Telesis AT-9000/28 - Appendix A: System Monitoring Commands; Table 125. System Monitoring Commands

1229
Appendix A
System Monitoring Commands
The system monitoring commands are summarized in Table 125.
Table 125. System Monitoring Commands
Command Mode Description
“SHOW CPU” on page 1230 Privileged Exec Displays a list of running processes
and their CPU utilization.
“SHOW CPU HISTORY” on
page 1231
Privileged Exec Displays graphs of historical CPU
utilization of the switch.
“SHOW CPU USER-THREADS” on
page 1232
Privileged Exec Displays a list of CPU utilization and
status of the user threads.
“SHOW MEMORY” on page 1233 Privileged Exec Displays memory consumptions of the
processes.
“SHOW MEMORY ALLOCATION” on
page 1234
Privileged Exec Displays the memory allocations used
by the processes.
“SHOW MEMORY HISTORY” on
page 1235
Privileged Exec Displays a graph showing historical
memory usage.
“SHOW MEMORY POOLS” on
page 1236
Privileged Exec Displays a list of memory pools used
by the processes.
“SHOW PROCESS” on page 1237 Privileged Exec Displays a summary of the current
running processes.
“SHOW SERIALNUMBER” on
page 1238
User Exec and
Privileged Exec
Displays the serial number of the
switch.
“SHOW SYSTEM INTERRUPTS” on
page 1239
Privileged Exec Displays the number of interrupts for
each IRQ (Interrupt Request) used to
interrupt input lines on a PIC
(Programmable Interrupt Controller)
on the switch.
“SHOW TECH-SUPPORT” on
page 1240
Privileged Exec Stores system information in a file in
the file system.