Chapter 8: Port Parameter Commands
162 Section II: Basic Operations
CLEAR PORT COUNTER
Syntax
clear port counter
port
Parameters
port Specifies the port whose packet counters you want to
clear. You can specify more than one port at a time in
the command.
Mode
User Exec mode and Privileged Exec mode
Description
Use this command to clear the packet counters of the ports. To display the
counters, refer to “SHOW PLATFORM TABLE PORT” on page 191.
Example
This example clears the packet counters for ports 4 to 7:
awplus# clear port counter port1.0.4-port1.0.7
To Next Page
Loading...
