AT-9000 Switch Command Line User’s Guide
Section II: Basic Operations 231
NO IPV6 ROUTE
Syntax
no ipv6 route ::/0
ipaddress
Parameters
ipaddress Specifies the current IPv6 default gateway.
Mode
Global Configuration mode
Description
Use this command to delete the current IPv6 default gateway from the
switch. The command must include the current default gateway.
Confirmation Command
“SHOW IPV6 ROUTE” on page 236
Example
This example deletes the IPv6 default route 2b45:12:9ac4::5bc7:89 from
the switch:
awplus> enable
awplus# configure terminal
awplus(config)# no ipv6 route ::/0 2b45:12:9ac4::5bc7:89
To Next Page
Loading...
