Allied Telesis AT-9000/28 - Chapter 14: MAC Address Table Commands; Table 19. MAC Address Table Commands

265
Chapter 14
MAC Address Table Commands
The MAC address table commands are summarized in Table 19.
Table 19. MAC Address Table Commands
Command Mode Description
“CLEAR MAC ADDRESS-TABLE” on
page 266
Privileged Exec Deletes MAC addresses from the
MAC address table.
“MAC ADDRESS-TABLE AGEING-
TIME” on page 268
Global
Configuration
Sets the aging timer, which is used by
the switch to identify inactive dynamic
MAC addresses for deletion from the
table.
“MAC ADDRESS-TABLE STATIC” on
page 270
Global
Configuration
Adds static unicast MAC addresses to
the table.
“NO MAC ADDRESS-TABLE STATIC”
on page 272
Global
Configuration
Deletes static unicast MAC addresses
from the table.
“SHOW MAC ADDRESS-TABLE” on
page 274
Privileged Exec Displays the MAC address table and
the aging timer.