Allied Telesis AT-9000/28 - Show Ip Igmp Snooping

Chapter 20: IGMP Snooping Commands
328 Section II: Basic Operations
SHOW IP IGMP SNOOPING
Syntax
show ip igmp snooping
Parameters
None.
Mode
Privileged Exec mode
Description
Use this command to display the IGMP snooping parameters. Figure 67
illustrates the information.
Figure 67. SHOW IP IGMP SNOOPING Command
IGMP Snooping Configuration:
IGMP Snooping Status ............... Enabled
Querier Admin ...................... Disabled
Host Topology ...................... Single-Host/Port (Edge)
Host/Router Timeout Interval ....... 260 seconds
Maximum IGMP Multicast Groups ...... 64
Router Port(s) ..................... Auto Detect
Router List:
VLAN Port/ Exp.
ID Trunk ID RouterIP Time
----------------------------------------------------
1 12 172.16.01.1 22
Host List:
Number of IGMP Multicast Groups: 4
VLAN Port/ IGMP Exp.
MulticastGroup ID TrunkID HostIP Ver Time
------------------------------------------------------------
01:00:5E:00:01:01 1 6/- 172.16.10.51 v2 21
01:00:5E:7F:FF:FA 1 5/- 149.35.200.75 v2 11
149.35.200.65 v2 65
01:00:5E:00:00:02 1 17/- 149.35.200.69 v2 34
01:00:5E:00:00:09 1 14/- 172.16.10.51 v2 32