Allied Telesis AT-9000/28 - Table 1. Alliedware Plus Modes

AT-9000 Switch Command Line User’s Guide
Section I: Getting Started 43
Port Interface mode to designate the ports.
The modes, their command line prompts, and their functions are listed in
Table 1.
Table 1. AlliedWare Plus Modes
Mode Prompt Function
User Exec mode awplus>
 Displays the switch settings.
 Lists the files in the file system.
 Pings remote systems.
Privileged Exec mode awplus#
 Displays the switch settings.
 Lists the files in the file system.
 Pings remote systems.
 Sets the date and time.
 Saves the current configuration.
 Downloads new versions of the
management software.
 Restores the default settings.
 Renames files in the file system.
 Resets the switch.
Global Configuration mode (config)#
 Creates classifiers and access
control lists.
 Creates encryption keys for
remote HTTPS and SSH
management.
 Activates and deactivates 802.1x
port-based network access
control.
 Assigns a name to the switch.
 Configures IGMP snooping.
 Sets the MAC address table aging
timer.
 Enters static MAC addresses.
 Specifies the IP address of an
SNTP server.
 Configures the RADIUS client.
 Sets the console timer.