Allied Telesis AT-9000/28 - Show Etherchannel Detail

AT-9000 Switch Command Line User’s Guide
Section V: Port Trunks 461
SHOW ETHERCHANNEL DETAIL
Syntax
show etherchannel detail
Parameters
None.
Mode
Privileged Exec mode
Description
Use this command to display detailed information about the aggregators
on the switch. Figure 84 illustrates the information.
Figure 84. SHOW ETHERCHANNEL DETAIL Command
Examples
awplus# show etherchannel detail
Aggregator # 1 ..... po1
Mac address: (00-15-77-D8-43-60,0000)
Admin Key: 0xff01 - Oper Key: 0x0101
Receive link count: 4 - Transmit link count: 4
Individual: 0 - Ready: 0
Distribution Mode .. MACBoth
Partner LAG: (0080,00-A0-D2-00-94-24,F601)
Link: Port 1.0.1 sync
Link: Port 1.0.2 sync
Link: Port 1.0.3 sync
Link: Port 1.0.4 sync
Aggregator # 22..... po22
Mac address: (00-15-77-D8-43-60,0000)
Admin Key: 0xff16 - Oper Key: 0x1616
Receive link count: 0 - Transmit link count: 0
Individual: 0 - Ready: 0
Distribution Mode .. MACDest
Partner LAG: (0000,00-00-00-00-00-00,0000)
Link: Port 1.0.22 disabled
Link: Port 1.0.23 disabled
Link: Port 1.0.24 disabled