Allied Telesis AT-9000/28 - DISABLE Command

AT-9000 Switch Command Line User’s Guide
Section I: Getting Started 51
Figure 18. Returning to the Privileged Exec Mode with the END Command
DISABLE
Command
To return to the User Exec mode from the Privileged Exec mode, use the
DISABLE command.
Figure 19. Returning to the User Exec Mode with the DISABLE Command
Privileged
Executive
Mode
User
Executive
Mode
Global
Configuration
Mode
Class-Map
Mode
Other
Modes
Port
Mode
Interface
Line
Mode
Policy Map
Mode
Class
Mode
VLAN
Configuration
Mode
end
Static Port
Mode
Trunk
Privileged
Executive
Mode
User
Executive
Mode
Global
Configuration
Mode
disable