Chapter 40: RSTP Commands
528 Section VI: Spanning Tree Protocols
NO SPANNING-TREE ERRDISABLE-TIMEOUT ENABLE
Syntax
spanning-tree errdisable-timeout enable
Parameters
None.
Mode
Global Configuration mode
Description
Use this command to deactivate the timer for the RSTP BPDU guard
feature. When the timer is deactivated, ports that the feature disables
because they receive BPDU packets remain disabled until you manually
activate them again with the NO SHUTDOWN command.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 129
Example
awplus> enable
awplus# configure terminal
awplus(config)# no spanning-tree errdisable-timeout enable
To Next Page
Loading...
