Chapter 40: RSTP Commands
536 Section VI: Spanning Tree Protocols
SPANNING-TREE ERRDISABLE-TIMEOUT INTERVAL
Syntax
spanning-tree errdisable-timeout interval
interval
Parameters
interval Specifies the number of seconds that ports remain
disabled by the RSTP BPDU guard feature. The range
is 10 to 1000000 seconds. The default is 300 seconds.
Mode
Global Configuration mode
Description
Use this command to specify the number of seconds that must elapse
before the switch automatically enables ports that are disabled by the
RSTP BPDU guard feature. To activate the timer, refer to “SPANNING-
TREE ERRDISABLE-TIMEOUT ENABLE” on page 535.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 129
Examples
This example sets the time interval to 200 seconds:
awplus> enable
awplus# configure terminal
awplus(config)# spanning-tree errdisable-timeout interval
200
To Next Page
Loading...
