Chapter 40: RSTP Commands
552 Section VI: Spanning Tree Protocols
SPANNING-TREE RSTP PURGE
Syntax
spanning-tree rstp purge
Parameters
None.
Mode
Global Configuration mode
Description
Use this command to return all the RSTP bridge and port parameters to
the default settings. You must disable RSTP to use this command. To
disable RSTP, refer to “NO SPANNING-TREE RSTP ENABLE” on
page 532.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 129 or “SHOW SPANNING-TREE”
on page 533
Example
awplus> enable
awplus# configure terminal
awplus(config)# spanning-tree rstp purge
To Next Page
Loading...
