577
Chapter 42
Port-based and Tagged VLAN
Commands
The VLAN commands are summarized in Table 59.
Table 59. Port-based and Tagged VLAN Commands
Command Mode Description
“NO SWITCHPORT ACCESS VLAN”
on page 578
Port Interface Removes untagged ports from
VLANs.
“NO SWITCHPORT TRUNK” on
page 579
Port Interface Removes the tagged designation from
ports.
“NO SWITCHPORT TRUNK NATIVE
VLAN” on page 580
Port Interface Reestablishes the Default_VLAN as
the native VLAN of tagged ports.
“NO VLAN” on page 581 VLAN
Configuration
Deletes VLANs from the switch.
“SHOW VLAN” on page 582 User Exec and
Privileged Exec
Displays all the VLANs on the switch.
“SWITCHPORT ACCESS VLAN” on
page 584
Port Interface Adds untagged ports to a VLAN.
“SWITCHPORT MODE ACCESS” on
page 586
Port Interface Designates ports as untagged ports.
“SWITCHPORT MODE TRUNK” on
page 587
Port Interface Designates ports as tagged ports.
“SWITCHPORT TRUNK ALLOWED
VLAN” on page 589
Port Interface Adds and removes tagged ports from
VLANs.
“SWITCHPORT TRUNK NATIVE
VLAN” on page 592
Port Interface Designates native VLANs for tagged
ports.
“VLAN” on page 594 VLAN
Configuration
Creates VLANs.
To Next Page
Loading...
