Chapter 46: MAC Address-based VLAN Commands
648 Section VII: Virtual LANs
NO VLAN
Syntax
no vlan
vid
Parameters
vid Specifies the VID of the VLAN you want to delete. You
can specify just one VID.
Mode
VLAN Configuration mode
Description
Use this command to delete MAC address-based VLANs from the switch.
You can delete only one VLAN at a time with this command.
Confirmation Command
“SHOW VLAN MACADDRESS” on page 651
Example
This example deletes a MAC address-based VLAN with the VID 18:
awplus> enable
awplus# configure terminal
awplus(config)# vlan database
awplus(config-vlan)# no vlan 18
To Next Page
Loading...
