Allied Telesis AT-9000/28 - Chapter 51: VLAN Stacking Commands; Table 70. VLAN Stacking Commands

689
Chapter 51
VLAN Stacking Commands
The VLAN stacking commands are summarized in Table 70.
Table 70. VLAN Stacking Commands
Command Mode Description
“NO SWITCHPORT VLAN-
STACKING” on page 690
Port Interface Removes ports from VLAN stacking.
“PLATFORM VLAN-STACKING-TPID”
on page 691
Global
Configuration
Specifies the Tag Protocol Identifier
(TPID) value.
“SHOW VLAN VLAN-STACKING” on
page 692
Privileged Exec Displays the port assignments of
VLAN stacking
“SWITCHPORT VLAN-STACKING”
on page 693
Port Interface Enables VLAN stacking on a port and
designates it as a customer-edge-port
or provider-port.