Allied Telesis AT-9000/28 - Dot1 X Initialize Interface

AT-9000 Switch Command Line User’s Guide
Section VIII: Port Security 765
DOT1X INITIALIZE INTERFACE
Syntax
dot1x initialize interface port
Parameters
port Specifies a port. You can enter more than one port.
Mode
Privileged Exec mode
Description
Use this command to force authenticator ports into the unauthorized state.
You might use this command to force supplicants on authenticator ports to
reauthenticate themselves again by logging in with their user names and
passwords.
Example
This example forces authenticator ports 16 and 22 into the unauthorized
state so that the supplicants must log on again:
awplus> enable
awplus# dot1x initialize interface port1.0.16, port1.0.22