Allied Telesis AT-9000/28 - Show Dot1 X Supplicant Interface

AT-9000 Switch Command Line User’s Guide
Section VIII: Port Security 785
SHOW DOT1X SUPPLICANT INTERFACE
Syntax
show dot1x supplicant interface port [brief]
Parameters
port Specifies a port. You can enter more than one port.
Mode
Privileged Exec mode
Description
Use this command to display the number and types of supplicants on
authenticator ports. This command is equivalent to “SHOW AUTH-MAC
SUPPLICANT INTERFACE Command” on page 780. An example is
shown in Figure 134.
Figure 134. SHOW DOT1X SUPPLICANT INTERFACE Command
The BRIEF parameter displays an abbreviated form of this window.
Example
awplus# show dot1x supplicant interface port1.0.21-
port1.0.23
Interface port1.0.3
authenticationMethod: dot1x
totalSupplicantNum: 0
authorizedSupplicantNum: 0
macBasedAuthenticationSupplicantNum: 0
dot1xAuthenticationSupplicantNum: 0
webBasedAuthenticationSupplicantNum: 0
otherAuthenticationSupplicantNum: 0
No supplicants