Allied Telesis AT-9000/28 - Show Snmp-Server View; Table 78. SHOW SNMP-SERVER VIEW Command

AT-9000 Switch Command Line User’s Guide
Section IX: Simple Network Management Protocols 815
SHOW SNMP-SERVER VIEW
Syntax
show snmp-server community
Parameters
None.
Mode
Privileged Exec mode
Description
Use this command to display the SNMPv1 and SNMPv2c views on the
switch. Here is an example of the display.
Figure 141. SHOW SNMP-SERVER VIEW Command
The fields in the entries are described in Table 78.
Example
awplus# show snmp-server view
SNMP View information:
View Name ............. system
OID ................ 1.3.6.12.1.1
Type ............... excluded
View Name ............. AlliedTelesis
OID ................ 1.3.6.1.4.1.207
Type ............... excluded
Table 78. SHOW SNMP-SERVER VIEW Command
Parameter Description
View Name The view name.
OID The OID to a section of the MIB tree.
Type The view type, which is always excluded.