AT-9000 Switch Command Line User’s Guide
Section IX: Simple Network Management Protocols 831
NO SNMP-SERVER VIEW
Syntax
no snmp-server view
view OID
Parameters
view Specifies the name of a view to be deleted from the
switch. The name is case sensitive.
OID Specifies the OID of the subtree of the view to be
deleted.
Mode
Global Configuration mode
Description
Use this command to delete SNMPv3 views from the switch.
Confirmation Command
“SHOW SNMP-SERVER VIEW” on page 836
Example
This example deletes the view All, which has the OID 1.3.6.1:
awplus> enable
awplus# configure terminal
awplus(config)# snmp-server view All
subtree 1.3.6.1
To Next Page
Loading...
