Allied Telesis AT-9000/28 - Sflow Enable

AT-9000 Switch Command Line User’s Guide
Section X: Network Management 865
SFLOW ENABLE
Syntax
sflow enable
Parameters
None.
Mode
Global Configuration mode
Description
Use this command to activate the sFlow agent on the switch. The switch
uses the agent to gather packet sampling data and packet counters from
the designated ports and to transmit the data to the sFlow collector on your
network.
Confirmation Command
“SHOW SFLOW DATABASE” on page 872
Example
awplus> enable
awplus# configure terminal
awplus(config)# sflow enable