Chapter 62: LLDP and LLDP-MED Commands
926 Section X: Network Management
LLDP RUN
Syntax
lldp run
Parameters
None.
Mode
Global Configuration mode
Description
Use this command to activate LLDP on the switch. Once you have
activated LLDP, the switch begins to transmit and accept advertisements
on its ports. To deactivate LLDP, refer to “NO LLDP RUN” on page 944.
Confirmation Command
“SHOW LLDP” on page 949.
Example
awplus> enable
awplus# configure terminal
awplus(config)# lldp run
To Next Page
Loading...
