Chapter 62: LLDP and LLDP-MED Commands
944 Section X: Network Management
NO LLDP RUN
Syntax
no lldp run
Parameters
None.
Mode
Global Configuration mode
Description
Use this command to disable LLDP and LLDP-MED on the switch. The
switch, when LLDP and LLDP-MED are disabled, neither sends
advertisements to nor collects information from its neighbors. The LLDP
settings are retained by the switch.
Confirmation Command
“SHOW LLDP” on page 949
Example
awplus> enable
awplus# configure terminal
awplus(config)# no lldp run
To Next Page
Loading...
