Allied Telesis AT-9000/28 - Page 960

Chapter 62: LLDP and LLDP-MED Commands
960 Section X: Network Management
Examples
This example displays a summary of the information from all the neighbors
connected to the switch:
awplus# show lldp neighbors interface
This example displays a summary of the information from the neighbors
connected to ports 1 and 4:
awplus# show lldp neighbors interface port1.0.1,port1.0.4
Neighbor System Name The neighbor’s system name.
Neighbor Capability Capabilities that are supported and
enabled on the neighbor.
Table 95. SHOW LLDP NEIGHBORS INTERFACE Command
Parameter Description