Allied Telesis AT-9000/28 - Show Lldp Statistics Interface; Table 97. SHOW LLDP STATISTICS INTERFACE Command

AT-9000 Switch Command Line User’s Guide
Section X: Network Management 963
SHOW LLDP STATISTICS INTERFACE
Syntax
show lldp statistics interface [ port ]
Parameters
port Specifies a port. You can specify more than one port.
Mode
User Exec mode and Privileged Exec mode
Description
Use this command to display the LLDP statistics for the individual ports.
Here is an example of the information.
Figure 158. SHOW LLDP STATISTICS INTERFACE Command
The information the command displays is explained in Table 97.
LLDP Packet and Event counters:
Port 2
Frames: Out ................... 15
In .................... 12
In Errored ............ 0
In Dropped ............ 0
TLVs: Unrecognized .......... 0
Discarded ............. 0
Neighbors: New Entries ........... 1
Deleted Entries ....... 0
Dropped Entries ....... 0
Entry Age-outs ........ 0
Table 97. SHOW LLDP STATISTICS INTERFACE Command
Statistic Description
Frame Out Number of LLDPDU frames transmitted
by the port.
Frame In Number of LLDPDU frames received by
the port.
Frame In Errored Number of invalid LLDPDU frames
received by the port.