EasyManuals Logo

Allied Telesis AT-9000 Series User Manual

Allied Telesis AT-9000 Series
1526 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1040 background imageLoading...
Page #1040 background image
Chapter 65: SNMPv1 and SNMPv2c Commands
1040
SNMP-SERVER VIEW
Syntax
snmp-server view
viewname oid excluded|included
Parameters
viewname
Specifies the name of a new view. The maximum length is 64
alphanumeric and/or special characters. The string is case
sensitive. Spaces are not allowed.
oid
Specifies the OID of the view. The OID must be in decimal format.
excluded
Denies access to the part of the MIB tree specified by the OID.
included
Permits access to the part of the MIB tree specified by the OID.
Mode
Global Configuration mode
Description
Use this command to create SNMPv1 and SNMPv2c views on the switch.
Views are used to restrict the MIB objects that network managers can
access through the community strings. A view can have more than one
OID, but each OID must be entered in a separate command.
Confirmation Command
“SHOW SNMP-SERVER VIEW” on page 1033
Examples
This example creates a view that excludes all MIB objects in the OID
1.3.6.1.2.1. The view is assigned the name “sw12_restrict_view:”
awplus> enable
awplus# configure terminal
awplus(config)# snmp-server view sw12_restrict_view
1.3.6.1.2.1 excluded

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis AT-9000 Series and is the answer not in the manual?

Allied Telesis AT-9000 Series Specifications

General IconGeneral
BrandAllied Telesis
ModelAT-9000 Series
CategorySwitch
LanguageEnglish

Related product manuals