AT-9000 Switch Command Line User’s Guide
1051
NO SNMP-SERVER VIEW
Syntax
no snmp-server view
view OID
Parameters
view
Specifies the name of a view to be deleted from the switch. The
name is case sensitive.
OID
Specifies the OID of the subtree of the view to be deleted.
Mode
Global Configuration mode
Description
Use this command to delete SNMPv3 views from the switch.
Confirmation Command
“SHOW SNMP-SERVER VIEW” on page 1056
Example
This example deletes the view All, which has the OID 1.3.6.1:
awplus> enable
awplus# configure terminal
awplus(config)# snmp-server view All
subtree 1.3.6.1
To Next Page
Loading...
