AT-9000 Switch Command Line User’s Guide
1065
SNMP-SERVER VIEW
Syntax
snmp-server view
viewname
oid excluded|included
Parameters
viewname
Specifies the name of a new view. The maximum length is 64
alphanumeric and/or special characters. The string is case
sensitive. Spaces are not allowed.
oid
Specifies the OID of the view. The OID must be in decimal format.
Each decimal equals 1 character, for example, 1.3.6.1.1 would be
equivalent to 9 characters.
excluded
Denies access to the part of the MIB tree specified by the OID.
included
Permits access to the part of the MIB tree specified by the OID.
Mode
Global Configuration mode
Description
Use this command to create SNMPv3 views on the switch. Views are used
to restrict the MIB objects that network managers can access through
SNMPv3 groups. A view can have more than one OID, but each OID must
be added in a separate command.
Confirmation Command
“SHOW SNMP-SERVER VIEW” on page 1056
Examples
This example creates a view that excludes all MIB objects in the OID
1.3.6.1.2.1. The view is assigned the name “sw12_restrict_view:”
awplus> enable
awplus# configure terminal
awplus(config)# snmp-server view sw12_restrict_view
1.3.6.1.2.1 excluded
To Next Page
Loading...
