Allied Telesis AT-9000 Series - Chapter 69: LLDP and LLDP-MED

1093
Chapter 69
LLDP and LLDP-MED
This chapter contains the following topics
 “Overview” on page 1094
 “Enabling LLDP and LLDP-MED on the Switch” on page 1099
 “Configuring Ports to Only Receive LLDP and LLDP-MED TLVs” on
page 1100
 “Configuring Ports to Send Only Mandatory LLDP TLVs” on page 1101
 “Configuring Ports to Send Optional LLDP TLVs” on page 1102
 “Configuring Ports to Send Optional LLDP-MED TLVs” on page 1104
 “Configuring Ports to Send LLDP-MED Civic Location TLVs” on
page 1106
 “Configuring Ports to Send LLDP-MED Coordinate Location TLVs” on
page 1109
 “Configuring Ports to Send LLDP-MED ELIN Location TLVs” on
page 1113
 “Removing LLDP TLVs from Ports” on page 1115
 “Removing LLDP-MED TLVs from Ports” on page 1116
 “Deleting LLDP-MED Location Entries” on page 1117
 “Disabling LLDP and LLDP-MED on the Switch” on page 1118
 “Displaying General LLDP Settings” on page 1119
 “Displaying Port Settings” on page 1120
 “Displaying or Clearing Neighbor Information” on page 1121
 “Displaying Port TLVs” on page 1123
 “Displaying and Clearing Statistics” on page 1124