Allied Telesis AT-9000 Series - Page 1108

Chapter 69: LLDP and LLDP-MED
1108
This series of commands adds the new location entry to port 14 and
configures the port to include the location TLV in its advertisements:
awplus(config_civic)# exit
Return to the Global Configuration
mode.
awplus(config)# exit
Return to the Privileged Exec
mode.
awplus# show location civic-location identifier 8
Use the SHOW LOCATION
command to verify the
configuration of the new location
entry.
awplus# configure terminal
Enter the Global Configuration
mode.
awplus(config)# interface port1.0.14
Enter the Port Interface mode for
port 14.
awplus(config-if)# lldp transmit receive
Configure the port to send and
receive LLDP advertisements.
awplus(config-if)# lldp location civic-location-
id 8
Use the LLDP LOCATION
command to add the civic location
entry, ID number 8, to the port.
awplus(config-if)# lldp med-tlv-select location
Use the LLDP MED-TLV-SELECT
command to configure the port to
send the location TLV in its
advertisements.
awplus(config-if)# end
Return to the Privileged Exec
Mode.
awplus# show location civic-location interface
port1.0.14
Use the SHOW LOCATION
command to confirm the
assignment of the civic location
entry to the port.
awplus# show lldp interface port1.0.14
Use the SHOW LLDP
INTERFACE command to confirm
the port is configured to send the
location entry.