Allied Telesis AT-9000 Series - Location CIVIC-Location; Table 103. LLDP-MED CIVIC Location Entry Parameters

AT-9000 Switch Command Line User’s Guide
1149
LOCATION CIVIC-LOCATION
Syntax
location civic-location identifier id_number
Parameters
id_number
Specifies an ID number for an LLDP-MED civic location entry on
the switch. The range is 1 to 256. (This range is separate from the
ID number ranges for coordinate and ELIN location entries.) You
can specify only one ID number.
Mode
Global Configuration mode
Description
Use this command to create or modify LLDP-MED civic location entries on
the switch. This command moves you to the Civic Location mode which
contains the parameters you use to define or modify an entry. The
parameters are listed in Table 103.
Table 103. LLDP-MED Civic Location Entry Parameters
Parameter Example
additional-code 12345
additional-information Updated-Aug-2010
branch-road-name Slate-Lane
building 102
city San-Jose
country US
county Santa-Clara
division North-Brookview
floor 4
house-number 401
house-number-suffix C
landmark city-library