Allied Telesis AT-9000 Series - Figure 189: SHOW LLDP LOCAL-INFO INTERFACE Command (Continued)

Chapter 70: LLDP and LLDP-MED Commands
1170
Figure 189. SHOW LLDP LOCAL-INFO INTERFACE Command
(continued)
The fields are defined in Table 106 on page 1172.
Examples
This example displays all ports that are actively transmitting TLVs:
awplus# show lldp local-info interface
This example displays the TLVs being actively transmitted by ports 18 and
23:
awplus# show lldp local-info interface port1.0.18,port1.0.23
Power Via MDI (PoE) .............. Not Supported
Link Aggregation ................. Supported / Disabled
Maximum Frame Size ............... 1522 (Octets)
LLDP-MED Device Type ............. Network Connectivity
LLDP-MED Capabilities ............ LLDP-MED Capabilities,
Network Policy,
Location Identification, Inventory
Network Policy ................... 1
Application Type ........... Voice
Frame Format ............... Untagged
VLAN ID .................... 1
Layer 2 Priority ........... 0
DSCP Value ................. 0
Location Identifier .............. [not advertised]
Extended Power Via MDI (PoE) ..... Not Supported
Inventory Information:
Hardware Revision ........... A
Firmware Revision ........... v1.0.0
Software Revision ........... v1.0.0
Serial Number ............... A04161H09020007
Manufacturer Name ........... ATI
Model Name .................. AT-9000/28SP
Asset ID .................... [not advertised]