Allied Telesis AT-9000 Series - Page 1197

AT-9000 Switch Command Line User’s Guide
1197
Example
The following example displays the ARP entries in the ARP cache on the
switch:
awplus# show arp
Type Indicates the type of entry. The type is one
of the following:
 Static: Static entry added with the ARP
(IP ADDRESS MAC ADDRESS)
command.
 Dynamic: Dynamic entry learned from
ARP request/reply exchanges.
 Invalid: Possible nonexistent entry.
 Other: Entry automatically generated
by the system.
Table 113. SHOW ARP Command (Continued)
Parameter Description