Allied Telesis AT-9000 Series - Deleting History Groups; Figure 199: SHOW RMON HISTORY Command

AT-9000 Switch Command Line User’s Guide
1205
Here is an example of the information.
Figure 199. SHOW RMON HISTORY Command
The fields are defined in Table 119 on page 1236.
Deleting History
Groups
Use the NO RMON COLLECTION HISTORY command in the Port
Interface mode to delete history groups from the switch. The switch stops
collecting port statistic histories as soon as you enter the command. This
example of the command deletes the history group with the ID 2 on port 2:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# no rmon collection history 2
History Index = 7
Data source ifindex = 7
Buckets requested = 8
Buckets granted = 8
Interval = 1800
Owner Agent
History Index = 23
Data source ifindex = 23
Buckets requested = 15
Buckets granted = 15
Interval = 3600
Owner Agent