Allied Telesis AT-9000 Series - Page 1315

AT-9000 Switch Command Line User’s Guide
Section X: Network Management 1315
awplus(config-if)# mls qos map dscp-queue 11 to 7
awplus(config-if)# mls qos map cos-queue 12 to 7
awplus(config-if)# mls qos map cos-queue 13 to 7
This example restores the default mappings of the DSCP priorities to the
egress queues on port 3:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.3
awplus(config-if)# no mls qos map dscp-queue