Allied Telesis AT-9000 Series - Show Mls Qos Maps Dscp-Queue

AT-9000 Switch Command Line User’s Guide
Section X: Network Management 1327
SHOW MLS QOS MAPS DSCP-QUEUE
Syntax
show mls qos maps dscp-queue interface port
Parameters
port Specifies the port to display. You can view only one port at
a time.
Mode
Privileged Exec mode
Description
Use this command to display the mappings of DSCP priority values to port
egress queues. An example of the information is shown in Figure 213 on
page 1328.