AT-9000 Switch Command Line User’s Guide
1353
Examples
This example creates a manager account for the user, allen. The privilege
level is 15 to give the manager access to all of the modes, unless
command mode restriction is activated. The password is “laf238pl:”
awplus> enable
awplus# configure terminal
awplus(config)# username allen privilege 15 password
laf238pl
This example creates a manager account for the user, sjones. The
privilege level is 1 to restrict the manager to the User Exec mode. The
password is “bluesky,” entered in its encrypted form.
awplus> enable
awplus# configure terminal
awplus(config)# username sjones privilege 1 password 8
c1a23116461d5856f98ee072ea319bc9
To Next Page
Loading...
