Chapter 89: Secure HTTPS Web Browser Server Commands
1430
IP HTTPS CERTIFICATE
Syntax
ip https certificate
id_number
Parameters
id_number
Specifies a certificate ID number.
Mode
Global Configuration mode
Description
Use this command to designate the active certificate for the secure
HTTPS web server. The switch can have only one active certificate. The
certificate, which must already exist on the switch, can be a self-signed
certificate that the switch created itself or a certificate that was issued by a
CA, from a certificate request generated by the switch.
Confirmation Command
“SHOW IP HTTPS” on page 1433
Example
This example designates the certificate with the ID number 1 as the active
certificate on the switch:
awplus> enable
awplus# configure terminal
awplus(config)# ip https certificate 1
To Next Page
Loading...
